| |
|
Swimming Pool Chemical |
|
|
| |
|
Please Click Here for an Image Gallery
|
Our chemicals are comparable to most other brands such as GUARDEX®, BIOGARD®, PACE® This is 99% Sodium Dichloro-s-Triazinetrione Dihydrate containing 56% available chlorine to destroy algae and bacteria quickly. It is fast dissolving and 100% soluble. Concentrated Granules is an excellent choice for daily chlorination by direct application to the pool or skimmer. 1 Ounce per 3,500 gallons daily
- Disinfect, Control algae, Kill bacteria
- Rapidly and completely 100% soluble
- Excellent choice for daily chlorination
- UV stabilized
- 24 Hour Chlorine residual
- 1 ounce per 3,500 gallons daily
- Feed through skimmer or broadcast directly into pool
- 99% Dichloro-s-Triazinetrione
- 56% Available Chlorine
- MSDS Information
|
|
|
|
|
|
|
|
|
|
|
Special Precautions before opening Container
To prevent physical injury:
Do not open container indoors. This product emits a powerful chlorine gas.
- Hold away from face when opening to avoid breathing fumes
This product is dangerous when not used properly:
MISUSE MAY RESULT IN SERIOUS PERSONAL INJURY REQUIRING HOSPITALIZATION
RELATED COMPLICATIONS MAY LEAD TO DEATH
Do not mix with any other chemicals - this may cause a violent and instantaneous chemical reaction.
Do not add water to this product.
Do not add this product to water in a pail.
Do not take advice from others.
Do not experiment: FOLLOW INSTRUCTIONS EXACTLY.
|
|
Directions for Use:
Superchlorination
When starting up a new pool superchlorinate to satisfy pool chlorine demand and to establish a swimming pool chlorine residual of 1.0 ppm to 1.5 ppm available chlorine.
Add 2 oz. of this product per 1,000 gallons which will provide 8.7 ppm available chlorine.
Test with a reliable chlorine test kit.
Bathers should not be allowed to enter the pool until the chlorine residual has dropped to 3.0 ppm or less.
The next morning add Conditioner and Stabilizer (Cyanuric Acid) according to the directions on the label to stabilize the pool.
Note: It is a violation of Federal Law to use this product in
a manner inconsistent with its labeling. |
Daily Chlorination:
This product should be added daily or as needed at the rate of 1/4 to 1/2 oz. per 1,000
gallons of pool water to maintain a chlorine residual at all times of 1.0 ppm to 1.6 ppm as determined by a suitable test kit.
The pH should be maintained between 7.2 - 7.6
|
Swimming Pool Shock Treatment: ...get swimming pool shock here
A shock treatment should be maintained every week during hot weather or after heavy rains. Less frequent shock treatments may be made during cool weather.
For the shock treatment, add 2 oz. of this product per 1,000 gallons of swimming pool water.
Swimmers should not be permitted in the pool after the shock treatment until the chlorine residual falls to 3.0 ppm or less.
Keep in mind that a slight flexibility must be maintained in the event of
heavy accumulations of dust and dirt caused by storms of super heavy bathing loads which require additional dosages as needed to maintain the chlorine residual between 1.0 and 1.5 ppm.
Pool should not be entered until the chlorine residual is below 3.0 ppm.
|
|
Application Methods
Skimmer Method: use this method to avoid bleaching vinyl liner or paint
Empty skimmer of all chemicals and/or debris.
Make sure that the filter is on and properly recirculating through skimmer.
Remove any chemicals that may be in an in-line automatic chemical dispensing device.
Pour this product slowly into skimmer, making sure that the material is drawn into the system at the same rate:
do not allow this material to accumulate as gases generated may cause an explosion
Dose Directly into Pool:
Broadcast across surface of water.
To prevent liner damage, use skimmer method
|
|
|
| |
