|
Please Click Here for an Image Gallery
|
PE21 comes with both poolside and in-home remote alarms and a poolside air/water temperature monitor. PoolEye alarms are equipped with the most advanced pool alarm technology available to subsurface wave detection. PoolEye alerts you to accidental falls into the pool and unwanted pool intrusion while eliminating false alarms from wind, rain, falling leaves, etc. It detects objects weighing 15 lbs or more entering the pool, and all models feature adjustable sensitivity. A PoolEye alarm is an essential addition to any pool safety program.
- Patented Sub-Surface Propagation Wave Detector
- Sensor Placed Below Water Surface Eliminates False Alarms Due to Wind, Rain, etc.
- Detects Objects 15 lbs or More
- Stainless Steel Deck Mounting System and Ladder Mounting System Included
- 120 dB Alarm Siren, 95 dB at 10 ft. at Poolside
- Tested to UL 464 and CSA C22.2
- Child-Proof ON/OFF Switch w/Audio Indicator and Battery Strength Check Chirp
- Built-in RF Channel A or B Select
- Remote Receives Signal up to 100' Away
- Remote can be Connected to a Home Security System
- 2 Thermostats for Monitoring Both Water and Air Temperature in F or C
degrees
- Automatic Low Battery Check - Chirps Every 60 Seconds
- Recommended for Pools up to 18' x 36' (Larger Pools Require an Additional Alarm)
- Automatic Reset in 3 Minutes
- Power Check Test Button
- 3/4" LCD Display
- Water-Resistant/Weatherproof Construction
- Operates on 1 - 9 Volt Batter (not Included) For Remote
- Remote Uses AC Power Adapter (UL/CSA Listed) w/ backup 9-Volt battery (not included)
- Back-up 9 Volt Battery (Not Included) for Remote
- Owner's Manual
|
