Handrails are made of 1.90" O.D. x 0.065" wall, 304 Stainless steel tube with polished and buffed finish. All bends are 6" radius. Custom dimension handrails are available on a special order basis.

With proper anchoring, the Deck Mounted Commercial Stair Rail is suitable for se on stairs and slopes on poured concrete, shotcrete, fiberglass, and vinyl commercial pools and spas as well as the other applications in most geographic areas.

The Bod of each stanchion is made of polished 1.9" O.D. 304 stainless steel with a wall thickness of 0.065". They have an overall length (excluding eyebolts) of 40". They have a height above the (recommended) anchor of approximately 36".

This 8' Backstroke stanchion is made of polished type 304 stainless steel. An eyebolt is attached to the top of the stanchion to affix pennants. When anchored in properly, the backstroke stanchion stands 7'6" above deck level.

Commercial Ring Handrails are made of polished, 15/8" O.D., 304 stainless steel with a wall thickness of 0.065". The front and rear legs of each handrail return to mount into a single special anchor socket on either side.

The Commercial Exercise, Training and Therapeutic (ETT) Bars with and without flanges are of polished, 1.9" O.D., 304 stainless steel with a wall thickness of 0.065". The ETT extends [on center] a distance of approximately 4" beyond the flange mounting post.

1.90" O.D. and available in 0.065", 0.109" and 0.145" wall thickness. 304 stainless steel tube with polished and buffed finish.

1.60" O.D. and available in 0.065", 0.109", and 0.145" wall 304 stainless steel tube with a polished and buffed finish. 316L stainless steel available upon request.

Depending on the model chosen, these stanchions are either intended to be (1) linked together to form flexible and changeable line and barrier markings at amusement parks, entertainment centers, swimming pools, water features, theaters and other commercial applications where orderly line markings or barrier markings are required but where fencing is inappropriate or unsafe, or (2) used as banner stanchions for a variety of commercial, municipal, and social facilities.

Ladder frames are mad of 1.9" O.D. and available in 0.065", 0.109", and 0.145" wall type 304 stainless steel tube with polished and buffed finish. All bends are 4" radius to provide a closer fit between pool wall and ladders.

Ladder Frames are made of 1.90" O.D. x 0.065" wall 304 stainless steel tube with a polished and buffed finish. All bends are 6" radius. Ladder frames shall extend from pool wall 6 1/2".

Pretzel Bend Handrail design allows the anchors to be placed laterally taking up a minimum amount of deck space. With proper anchoring, the Pretzel bend handrail is suitable for use on poured concrete, shotcrete, and fiberglass commercial pools and spas as well as for other applications in most geographic areas.

The Pacific Pretzel Bend Handrail design allows the anchors to be placed laterally taking up a minimum amount of deck space. With proper anchoring, the Pacific Pretzel bend Handrail is suitable for use on poured concrete, shotcrete, and fiber glass commercial pools and spas as well as for other applications in most geographic areas.

This is tall height, long reach, special application ladder for both commercial and residential uses and is available with 3, 4, 5, or 6 treads. With proper anchor sockets, they are suitable for moderated to heavy-duty use in most geographic areas on both commercial and residential poured concrete and shotcrete, pools and spas where a long reach cantilevered ladder with handrails is desired

Easily removed for winter storage, these ladder frames are made of 1.90" O.D. x 0.065" wall, 304 stainless steel tubing with polished and buffed finish. Stainless steel bolts can be permanently installed. Plate slips over bold heads to lock ladder in place. Elite tread is LTDF