|
|
|
Home 
Pool
Chemicals
Balancer & Stabilizers Pool Chemicals |
|
|
Swimming
Pool Chemicals |
| |
|
Swimming Pool
Balancers and Stabilizers |
| |
-
Water Balancers
It is important to keep your pool water in balance to
get the most effective use of your chemicals. Test daily
to ensure that pH, total alkalinity, calcium hardness
and cyanuric acid (stabilizer) are within the correct
levels.
- pH is
the most important factor in controlling you pool water
balance. High pH results in cloudy water, staining,
scale, and filtration problems. Low pH leads to corrosion
of metal pipes, etched plaster, rapid loss of chlorine,
and irritation to swimmers.
- Alkalinity
levels must be kept in check in order to control your
pH levels. It is impossible to keep pH in the proper
range if alkalinity is not within the desired range.
Also, when total alkalinity drops below 80 ppm, equipment
corrosion, plaster, etching and eye irritation can occur.
- Calcium hardness
is an integral component of water chemistry. Soft fill
water can cause low hardness levels, which leads to
the corrosion of pool surfaces and fixtures.
Stabilizer
(cyanuric acid) shields the chlorine in your pool water
from destruction from sunlight. Add to your pool water
each spring to help reduce chlorine usage throughout
the season.
|
|
|
|
|
 |
pH INCREASER
Raises pH levels to the ideal range. Use pH Increaser to
counteract problems caused by low pH levels.
pH Increaser is
100% Sodium Carbonate. It is a fast dissolving granular,
extremely alkaline and applied slowly to the pool.
|
 |
pH
REDUCER
THE SUPERIOR ALTERNATIVE TO MURIATIC
ACID!
pH is the safer, easier and less corrosive alternative to
muriatic acid. Add pH Reducer to lower pH to the ideal range
of 7.2 to 7.6 ppm.
Often called dry acid, this
100% Sodium Bisulfate compound lowers pH and Alkalinity.
It is a fast dissolving granular, extremely acidic and
is applied directly to the pool.
|
 |
ALKALINITY POWDER
Raises alkalinity levels making pH and chlorine levels easier to maintain.
A key element in maintaining
pH stability, Nuclo Total Alkalinity is 100% Sodium
Hydrogen Carbonate. It is an extremely fast dissolving
granular, slightly alkaline and is applied directly to
the pool.
|
 |
CALCIUM HARDNESS INCREASER
Calcium is a valuable part of balanced water to prevent
corrosion of any metal parts and protect pool surfaces.
Nuclo Basic Calcium Hardness is 100% Calcium Chloride
Dihydrate. It is extremely fast dissolving, pH neutral and
is applied directly to the pool or pre-dissolved in water
|
 |
Conditioner & Stabilizer
Cuts Chlorine Consumption
This is 100% cyanuric acid to help prevent chlorine loss due
to UV radiation. For use in all newly filled pools and in
season for pools that use non-stabilized chlorine and chlorine
generators, Nuclo Conditioner & Stabilizer is a slow
dissolving granular that is applied directly in the pool or
slowly through the skimmer
|
| |
|
|
|
|
|
|
