STIC-O-STEEL
is a hand kneadable steel minutes of mixing. STIC-O-STEEL is extremely tough
and durable with exceptional adhesion to a wide range of metals. After one
hour, it can be free from black specs) drilled, tapped, filed, machined,
etc. Will not rust or oxide. Impervious to chemicals and corrosion. Will
adhere to wet surfaces, underwater, and within chemicals.
STIC-O-STEEL Is Fast With a setup time of 4-5 minutes, it becomes STEEL hard
in 15 minutes, and is completely cured within One hour. Ready to be drilled,
sanded, tapped, primed and painted in any home, office or shop .
STIC-O-STEEL is Strong enough to last a lifetime. When cured, it has the
tensile strength of 6,000 pounds per square inch. Which means a repair made
with a one inch piece of STIC-O-STEEL could lift the weight of 3
automobiles.
STIC-O-STEEL is Hard When cured it is a very hard material. As a result of a
proprietary blend of materials, which includes steel reinforcement as well
as the highest grades of epoxy, it has a technical rating when cured of a
D-87 hardness. In the shore rating system “D” is the highest rating of that
system. STIC-O-STEEL is Impenetrable It is impervious to chemicals such as
shop fluids, gasoline, diesel fuel, antifreeze, solvents, oils and acids
such as battery acids. It can withstand temperatures as high as 550 °F (288
°C) or as low as 91 °F (-68 °C). It has a 3 year minimum shelf life and is
Certified by NSF for repairs of all drinking water pipes, tanks and systems.
STIC-O-STEEL Even works under water Or in fluids and in all atmospheric
conditions. Repairs can be made inside a container, tank, etc. with the
liquids still in them … No need to empty them first . |
STIC-O-STEEL
Putty
Come in Two
Convenient Size
